Download (9Mb) - tuprints

[80] I. Lepot, V. Iliopoulou, G. Manzini, and J.-F. Simon. 3d endwall profiling impact on axial
flow compressor aerodynamics. Proceedings of International Symposium on Air Breathing
Engines, (Paper number 2009-1101), 2009.
[81] I. Lepot, T. Mengistu, S. Hiernaux, and O. De Vriendt. Highly loaded lpc blade and non
axisymmetric hub profiling optimization for enhanced efficiency and stability. Proceedings
of ASME Turbo Expo, (Paper number GT-2011-46261), 2011.
[82] S. Reising, H.-P. Schiffer, T. Hildebrandt, and P. Thiel. Automated aerodynamic optimisation
of a transonic compressor stage by application of non-axisymmetric endwalls.
Deutscher Luft- und Raumfahrtkongress, (Paper number 81252), 2008.
[83] S. Reising and H.-P. Schiffer. Improvement of a transonic compressor stage at off-design
conditions by sequential endwall profiling. Proceedings of ASME Turbo Expo, (Paper number
GT-2009-59133), 2009.
[84] S. Reising, J. Font Brossa, and H.-P. Schiffer. Cfd analysis of hub corner stall and secondary
flow in a transonic compressor stage with non-axisymmetric end walls. Proceedings of
European Turbomachinery Conference, (Paper number 152), 2009.
[85] S. Reising and H.-P. Schiffer. Improving the efficiency of a transonic compressor rotor
using non-axisymmetric endwalls: Optimization strategies and performance. Proceedings
of ASME Turbo Expo, (Paper number GT-2009-59134), 2009.
[86] S. Reising. Steady and Unsteady Performance of a Transonic Compressor Stage with Non-
Axisymmetric End Walls. PhD thesis, TU Darmstadt, 2010.
[87] E. Naylor, C. Duenas, R. Miller, and H. Hodson. Optimisation of non-axisymmetric
endwalls in s-shaped ducts. Proceedings of ASME Turbo Expo, (Paper number GT-2008-
50448), 2008.
[88] M. Karakasis, E. Naylor, R. Miller, and H. Hodson. The effect of an upstream compressor
on a non-axisymmetric s-duct. Proceedings of ASME Turbo Expo, (Paper number GT-2010-
23404), 2010.
[89] A. Sheard and A. Corsini. The impact of an anti-stall stabilisation ring on industrial
fan performance: Implications for fan selection. Proceedings of ASME Turbo Expo, (Paper
number GT-2011-45187), 2011.
[90] M. Ishida, T. Surana, D. Sakaguchi, and H. Ueki. Suppression of unstable flow at small
flow rates in a centrifugal blower by controlling tip leakage flow and reverse flow. Proceedings
of ASME Turbo Expo, (Paper number GT-2004-53400), 2004.
[91] B. Matyschok and B. Stoffel. Experimental investigations on a turbocharger compressor
having a recirculator for surge control. International Symposium on Transport Phenomena
and Dynamics of Rotating Machinery, (Paper number ISROMAC10-2004-010), 2004.
[92] P. Gao, W. Chu, and Y. Wu. Numerical investigation of two different casing treatment
in a low speed centrifugal compressor. Proceedings of International Symposium on Air
Breathing Engines, (Paper number 2007-1368), 2007.
104 Literaturverzeichnis