Download (9Mb) - tuprints
Download (9Mb) - tuprints
Download (9Mb) - tuprints
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
[43] V. Gümmer, U. Wenger, and H.-P. Kau. Using sweep and dihedral to control threedimensional<br />
flow in transonic stators of axial compressors. ASME Journal of Turbomachinery,<br />
123:40–48, January 2001. Issue 1.<br />
[44] A. Hergt, R. Meyer, K. Liesner, and E. Nicke. A new approach for compressor endwall<br />
contouring. Proceedings of ASME Turbo Expo, (Paper number GT-2011-45858), 2011.<br />
[45] A. Hergt, R. Meyer, M. Müller, and K. Engel. Loss reduction in compressor cascades by<br />
means of passive flow control. Proceedings of ASME Turbo Expo, (Paper number GT-2008-<br />
50357), 2008.<br />
[46] S.-J. Hiller, R. Matzgeller, and W. Horn. Stability enhancement of a multistage compressor<br />
by air injection. ASME Journal of Turbomachinery, 133(Paper number 031009), July<br />
2011. Issue 3.<br />
[47] G. Snedden, D. Dunn, G. Ingram, and D. Gregory-Smith. The performance of a generic<br />
non-axisymmetric end wall in a single stage, rotating turbine at on and off-design<br />
conditions. Proceedings of ASME Turbo Expo, (Paper number GT-2010-22006), 2010.<br />
[48] A. Hergt, C. Dorfner, W. Steinert, E. Nicke, and H.-A. Schreiber. Advanced nonaxisymmetric<br />
endwall contouring for axial compressors by generating an aerodynamic<br />
separator - part ii: Experimental and numerical cascade investigation. Proceedings of<br />
ASME Turbo Expo, (Paper number GT-2009-59384), 2009.<br />
[49] D. E. Bohn, K. Kusterer, N. Sürken, and F. Kreitmeier. Influence of endwall contouring<br />
in axial gaps on the flow field in a four-stage turbine. Proceedings of ASME Turbo Expo,<br />
(Paper number GT-2000-0472), 2000.<br />
[50] D. E. Bohn, N. Sürken, Q. Yu, and F. Kreitmeier. Axisymmetric endwall contouring in a<br />
four-stage turbine - comparison of experimental and numerical results. Proceedings of<br />
ASME Turbo Expo, (Paper number GT-2002-30351), 2002.<br />
[51] S. Eymann, U. Reinmöller, R. Niehuis, W. Förster, M. Beversdorff, and J. Gier. Improving<br />
3d flow characteristics in a multistage lp turbine by means of endwall contouring and<br />
airfoil design modification - part 1: Design and experimental investigation. Proceedings<br />
of ASME Turbo Expo, (Paper number GT-2002-30352), 2002.<br />
[52] J. Gier, S. Ardey, S. Eymann, U. Reinmöller, and R. Niehuis. Improving 3d flow characteristics<br />
in a multistage lp turbine by means of endwall contouring and airfoil design<br />
modification - part 2: Numersical simulation and analysis. Proceedings of ASME Turbo<br />
Expo, (Paper number GT-2002-30353), 2002.<br />
[53] G. Ingram, D. Gregory-Smith, and N. Harvey. Investigation of a novel secondary flow<br />
feature in a turbine cascade with end wall profiling. Proceedings of ASME Turbo Expo,<br />
(Paper number GT-2004-53589), 2004.<br />
[54] M. Nagel. Numerische Optimierung dreidimensional parametrisierter Turbinenschaufeln<br />
mit umfangsunsymmetrischen Plattformen Entwicklung, Anwendung und Validierung. PhD<br />
thesis, Universität der Bundeswehr München, 2004.<br />
Literaturverzeichnis 101
Change language