Download (9Mb) - tuprints

[14] A. Demargne and J. Longley. The aerodynamic interaction of stator shroud leakage and
mainstream flows in compressors. Proceedings of ASME Turbo Expo, (Paper number GT-
2000-0570), 2000.
[15] X. Yu and B. Liu. A prediction model for corner separation/stall in axial compressors.
Proceedings of ASME Turbo Expo, (Paper number GT-2010-22453), 2010.
[16] L. Ji, R. Cheng, W. Yi, and W. Shao. A model for prediction of corner separation. Proceedings
of International Symposium on Air Breathing Engines, (Paper number 2007-1323),
2007.
[17] S. Gbadebo, T. Hynes, and N. Cumpsty. Influence of surface roughness on threedimensional
separation in axial compressors. ASME Journal of Turbomachinery, 126:455–
463, October 2004. Issue 4.
[18] M. Goodhand and R. Miller. The impact of real geometries on three-dimensional separations
in compressors. Proceedings of ASME Turbo Expo, (Paper number GT-2010-22246),
2010.
[19] S. Gbadebo, N. Cumpsty, and T. Hynes. Interaction of tip clearance flow and threedimensional
separations in axial compressors. ASME Journal of Turbomachinery,
129:679–685, October 2007. Issue 4.
[20] J. Denton. Some limitations of turbomachinery cfd. Proceedings of ASME Turbo Expo,
(Paper number GT-2010-22540), 2010.
[21] N. A. Cumpsty. Compressor Aerodynamics. Longman Scientific and Technical, 1989. ISBN
0-582-01364-X.
[22] E. Greitzer. Review - axial compressor stall phenomena. ASME Journal of Fluids Engineering,
102:134–151, June 1980. Issue 2.
[23] E. Greitzer. Surge and rotating stall in axial flow compressors part 1: Theoretical compression
system model. ASME Journal of Engineering for Power, 98:190–198, April 1976.
Issue 2.
[24] E. Greitzer. Surge and rotating stall in axial flow compressors part 2: Experimental results
and comparison with theory. ASME Journal of Engineering for Power, 98:199–217, April
1976. Issue 2.
[25] F. Lin, M. Li, and J. Chen. Long-to-short length scale transition: A stall inception phenomenon
in an axial compressor with inlet distortion. Proceedings of ASME Turbo Expo,
(Paper number GT-2005-68656), 2005.
[26] C. Tan, I. Day, S. Morris, and A. Wadia. Spike-type compressor stall inception, detection,
and control. Annual Review of Fluid Mechanics, 42:275–300, October 2010.
[27] H. Vo, C. Tan, and E. Greitzer. Criteria for spike initiated rotating stall. ASME Journal of
Turbomachinery, 130(Paper number 011023), January 2008. Issue 1.
[28] A. Deppe, H. Saathoff, and U. Stark. Spike-type stall inception in axial-flow compressors.
Proceedings of European Turbomachinery Conference, (Paper number 017), 2005.
Literaturverzeichnis 99