Grundeinstellungen des PA 3000 HV - T+A Elektroakustik

Notes on Energy Saving
General information
Automatic power-down
(Energy saver)
The PA 3000 HV satisfies the requirements of the latest directives concerning
energy-saving measures (EuP directive). The modern design of the mains
power supply makes an important contribution to this.
The internal micro-processor constantly ensures that sub-assemblies which are
not currently required are automatically switched off. The micro-processor itself
operates in stand-by mode at a relatively low clock speed, and only responds to
the remote control receiver.
In stand-by mode the current drain of the PA 3000 HV is less than 0.5 Watt.
If you intend not to use the amplifier for a long period, it should be disconnected
from the mains socket, i.e. the mains plug should be withdrawn from the
wall socket.
The amplifier features an automatic power-down function. If the PA 3000 HV
detects no operation or music signal for a period longer than ninety minutes, it
automatically switches to stand-by mode. Two minutes before the device enters
the standby mode, a pop-up window appears on the screen. If the device
should stay in operation please press the button while this message is
displayed.
In countries outside the EU, in which the EuP directive has no validity, the
automatic power-down feature can be disabled if necessary (see chapter
entitled ‘Basic settings of the PA 3000 HV’).
50