HYDRAULIKPRESSE 2/2013 - einseitig - Hansa Flex

PraCtICal praxis
against corrosion by seawater, so its tank and accessories
were produced from stainless steel. Finally, the entire
plant was installed in a ten-foot container. “this is
where our colleagues in engineering Projects excelled
themselves. Make no mistake about that. this was absolutely
imperative in this project, because BarD has
really created an engineering wonder. So of course
the hydraulics must be equal to that in order to ensure
that it operates as it should”, timo Matusch praises the
achievement of his colleagues.
another challenge was the time factor. In order to complete the order on time,
the teams in Industrial Service occasionally had to work around the clock, either
on site or at the wilhelmshaven branch. “thanks to excellent cooperation
between our teams and with the assistance of a small number of subcontractors,
we were ultimately able to successfully complete the largest project
undertaken to date by the wilhelmshaven Industrial Service department”,
the Deputy regional Manager sums up the operation. to give an idea of the
size of this order, here are a few figures: In all, over 400 hydraulic hose lines
and about 900 metres of bent stainless steel pipelines of various dimensions
were manufactured and installed on site. the unit also includes 18 pressure
accumulators, each with a volume of 32 litres. Besides the above, hanSa-FleX
the twelve hydraulic
c ylinderS of the “Pgf” have
to deliver coloSSal forceS
delivered threaded connectors and rubber-coated clamps as well as the valve
and safety blocks.
prOBleM-Free OperaTiOn
the PGF has now been in operation for a number of months and completed its
work at 17 locations. “the entire system works like clockwork. Up to now, we have
had no problems whatsoever”, reports henry Schäfer, Quality Manager for the
BarD Group. But just in case a hydraulic hose line should fail, BarD maintains an
extensive spare parts inventory on board the “wind lift 1”, which was supplied
by hanSa-FleX. In this way, the experts in offshore wind energy are perfectly
equipped to finish “BarD offshore 1” on schedule and begin delivering clean energy
to German households. •
Engineering und Aggregatebau
Engineering and unit manufacture
HANSA-FLEX Betriebe für Engineering, Aggregate- und Anlagenbau
übernehmen im Rahmen des Systemanbieterkonzeptes Aufgaben vom
Layout einer Hydraulikanlage bis hin zur Montage und Inbetriebnahme.
Über unser Niederlassungsnetz wird dieses Angebot verfügbar.
HANSA-FLEX specialist engineering and unit and system manufacturing
centres provide the full range of services expected of a system provider, from
layout of hydraulic systems through to installation and commissioning.
These services are made available through the network of our branches.
Hansa-Flex fertigte unter anderem das aggregat, welches die zwölf Hydraulikzylinder des
„pGF“ mit der nötigen kraft versorgt.
One of the products made by Hansa-Flex was the unit that supplies the power to the
twelve hydraulic cylinders of the “pGF”.
Weiterführende Informationen finden Sie unter:
For more detailed information, please visit:
www.hansa-flex.com/solutions/engineeringaggregatebau.html
HYDRAULIKPRESSE 2|2013
43
hintergrundfoto/Background photo: BarD-Gruppe