User Manual

Weitere Magazine

Empfehlungen

Info

USER MANUAL EUROLITE IR remote for LED effects CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! For your own safety, please read this user manual carefully before you initially start-up. Every person involved with the installation, operation and maintenance of this device has to - be qualified - follow the instructions of this manual - consider this manual to be part of the total product - keep this manual for the entire service life of the product - pass this manual on to every further owner or user of the product - download the latest version of the user manual from the Internet INTRODUCTION Thank you for having chosen a EUROLITE IR remote for LED effects Please note that this remote control is individually available or as a set. OPERATION The LED effects with DMX connection have two operating modes. It can be operated via IR remote control or it can be run in DMX-controlled mode via a DMX controller. If the device is controlled via a DMX controller the remote control is deactivated. Operation via optional remote control The LED-effects are controlled via the optional 51914130 EUROLITE IR remote for LED effects. This controller is always needed, e.g. for setting the DMX starting address of the LED effect. Direct the remote control towards the front of the IR sensor. The maxium operating range is 10 meters. 6/8 00062838.DOC, Version 1.0
DMX-controlled operation FUNCTION <strong>Manual</strong> color adjustment via the brightness of the RGB LEDs Automatic change speed for change of color adjustable Sound-controlled color change* *only available for indoor models Programs 7 static colors; color change and color fade with adjustable speed Flash speed of flash adjustable Black Out turns LEDs on and off DMX starting address S 0 9 DMX controlled mode D 7/8 A SP SA PROG SP Slave mode SL BUTTON MODE You can control the spots individually via your DMX-controller. Every DMX-channel has a different occupation with different features. The individual channels and their features are listed under DMX-protocol. The starting address can be defined via the remote control and is the first channel from which the device will respond to the controller. Example for setting the DMX starting address 7: Step 1: Turn off the DMX-controller. Step 2: Press button S on the remote control. The red LEDs light, indicating you can start setting the address. Step 3: Press button 0. The green LEDs light. The setting of the 100 th figure was successful. Step 4: Press button 0. The blue LEDs light. The setting of the 10 th figure was successful. Step 5: Press button 7. All LEDs light. The setting of the 1 st figure was successful. Step 6: Press button D. The spot changes to DMX mode. Modifications occur in steps. Please do not hold the + and – buttons, rather press repeatedly. Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX data link. If two, three or more devices are addressed similarly, they will work similarly. After having addressed all devices, you may now start operating these via your lighting controller. Note: In order to change from DMX-controlled operation back to stand-alone operation, please disconnect the device from the DMX-controller. R G B F + + + + + + + - - - - - - - STAND-ALONE DMX 00062838.DOC, Version 1.0
Seite 1 und 2: Für weiteren Gebrauch aufbewahren!
Seite 3 und 4: BEDIENUNGSANLEITUNG EUROLITE IR-Ste
Seite 5: Einlegen/Wechseln der Batterie Schi

User Manual

Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.

Template löschen?

Als Template speichern?