Einbauanleitung

- Angle grinder, where necessary
- Wire brush, where necessary
- Cloth (for cleaning the adhesive surfaces)
Proceed as follows to install the air-termination rod support:
Before installing the air-termination rods/air-termination tip, the air-termination rod support must be
installed on the relevant pitched roof. Counter battens are required to this end (see Fig. 2).
The air-termination rod support can be used for pitched roofs with a roof inclination from 24° to 53°.
Counter batten spacing may vary from 60 to 75 cm (rafter spacing may vary from 50 to 70 cm)
(see Fig. 2).
rafter
counter batten
Fig. 2
Air-termination rod support
rafter spacing
counter batten spacing
3