Literaturverzeichnis 133 [Vog 1992] W. Vogel: Glaschemie, 3. Auflage, Springer Verlag, Berlin, 1992. [Wal 1972] W. Walter, Löten kurz und bündig, Lötverfahren, Lote, Flussmittel, Anwendungstechniken, Vogel-Verlag, 1972. [Wan 2007] E. Wanko, S. Groß, T. Koppitz, J. Remmel, U. Reisgen, W. Willsmann und R. Conradt, Glass-ceramic materials of the system Ba-MgO-SiO2 used as sealant for solid oxide fuel cell (SOFC), Löt 2007 DVS Band 243-1. [WEi 1994] M.C. Weinberg, J. Non-Cryst. Solids 167 (1994) 81. [Wei 2003] K.S. Weil, J.E. Deibler, J.S. Hardy, D.S. Kim, G.-G. Xia, L.A. 2003. [Wei 2005] K.S. Weil, J.Y. Kim, and J.S. Hardy, Reactive Air Brazing: A Novel Method of Sealing SOFCs and Other Solid-State Electrochemical Devices, Electrochemical and Solid-State Letters, 8 (2), (2005) A133- A1236. [Wei 2005] K.S. Weil, J.T. Darsell: Brazing Technology for Gas Separation Menmbranes, The Effects of Palladium Addition on the Properties of AgCuO, Based Air Brazes, In: 19th Annual Conference on Fossil Energy Materials, Mai 2005, Knozville, Tennesee (2005) 9-11. [Wie 2006] F. Wiener, “Entwicklung eines Dichtungskonzepts mit elastischer Komponente für die oxidkeramische Brennstoffzelle (SOFC)“, Diss., Bochum, Univ., 2006. [Will 1997] M.C. Williams; Proc.5th Int. Symp. SOFC (SOFC V), 2-5 June 1997, Aachen (edited by U. Stimming, S.C. Singhal, H. Tagawa, W. Lehnert), Electrochem. Soc. Inc., Penn., (1997), 3. [Xin 2006] X. Huang, K. Ridgeway, S. Narasimhan, The development of Low-Cost integrated Composite Seal for SOFC: Materials and Design Methodolies, Phase I Final Report, Connecticut Global Fuell Cell Center, 2006. [Yon 2005] J. Yong Kim, J.S. Hardy, and K.S. Weil, Novel Metal-Ceramic Joining for Planar SOFCs, Journal of the Electrochemical Society, 152 (6) (2005) J52-J58.
134 Literaturverzeichnis [Zac 1933] W.H. Zachariasen, Die Struktur der Gläser, Glastechn. Ber. 11, (1933), 120. [ZAT 2009] Zentralabteilung Technologie (ZAT), interner Bericht 2009.