T °C - JuSER - Forschungszentrum Jülich

Literaturverzeichnis 129
[Min 1993a] N.Q. Minh; J. Am. Ceram. Soc. 76 [3] (1993) 563.
[Min 1993b] N.Q. Minh, T.R.A.J.R. Esopa, J.V. Guihen, C.R. Horne, J.J.V. Ackeren;
Proc. 3rd Int. Symp. SOFC (SOFC-III), 16-21 May 1993, Honolulu
(edited by S.C. Singhal, H. Iwahara), Electrochem. Soc.. Inc. , Penn.,
(1993) 801.
[Mur 2003] A. MURARI, H. Albrecht, A. Barzona, S. Curiotto, L. Lotto: An Upgraded
Brazing Technique to Manufacture Ceramic-Metal Joints for UHV
applications, In: Vacuum 68 (2003) 321-328.
[Nag 1995] M. Nagata, C. Iwasama, S. Yamaoka, Y. Seino, M. Ono; Proc. 4th Int.
Symp. SOFC (SOFC-IV), 18-23 June 1995. Yokohama (edited by M
Dokiya, O. Yamamoto, H. Tagawa, S.C. Singhal), Electrochem. Soc.
Inc. Penn., (1995) 195.
[Ngu 2004] N. Q. Minh, Solide Oxide Fuel Cell: Technology Status, Int. J. Appl.
Ceram. Technol, 1 [1] (2004) 5-15.
[Nie 2007] K.A. Nielsen, M. Solvang, S.B.L. Nielsen, Glass composite seals for
SOFC application, Journal of the European Ceramic Society 27 (2007)
1817-1822.
[NIE 1997] A. De Pablos, A. Duran and M.I. Nieto, “Adjusting of Laboratory Filature.
Furnace for Obtaining Fibre Glass”, Bol. Esp. Ceram. Vidr., 36 [5]
(1997) 517 – 23.
[Oeh 1997] H. G. Oehmingen, Ch. Berger, H. Bretfeld; 9. VDI.- Jahrestagung
Schadenanalyse, 1. und 2. Okt. 1997, Würburg, VDI Berichte 1333, VDI
Verlag, Düsseldorf, (1997), 231.
[Pas 2001] M. Pascual, L. Pascual, A. Duran, Determination of the viscositytemperature
curve for glasses on the basis of fixed viscosity points
determined by hot stage microscopy, Physics and Chemistry of
Glasses, 42 (2001) 61-66.
[Pas 2004a] M. Pascual, C. Lara, A. Duran, Glass-forming ability, sinterability and
thermal properties in the systems RO-BaO-SiO2 (R = Mg, Zn), Journal
of Non-Crystalline Solids 348 (2004) 149-155.