Посмотреть инструкцию - Фирменный интернет-магазин ...

30
3 4 5
1
2
1
2
EN
MULTIFUNKTION ELECTRICAL OVEN
CONTROL
Oven operation functions are controlled by the
rotary switch 2 operation mode and rotary switch
1 temperature control set up on the control
panel.
The graphic symbols on the rotary switches
indicate the selected operation modes.
To switch off the oven, set up the rotary switch 2
operating mode and the rotary switch 1
temperature control in position «0».
For more comfort, you can use the electronic timer
and automatic programmer 4, which enables to
run the oven in automatical, half automatical or
manual cycle.
Important! The activation of the oven is
indicated by yellow 3 and red 5 control
lights.
After the selected oven temperature has been
reached, the red control light goes out.
If it is necessary to put the dish into a pre-heated
oven, do it after the red control light has gone out.
The red control light can also be on if the rotary
switch is set in the position to illuminate the oven.
In this position, however, the heating element of
the oven is off.
* for models with control electronic timer and programmer