UVA 97033 UVC 97034 - Henkel
UVA 97033 UVC 97034 - Henkel
UVA 97033 UVC 97034 - Henkel
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
6<br />
1 Please observe the following<br />
1.3 For Your Safety<br />
High voltage is generated at the ignition unit inside the lamp housing!<br />
Any repair work and other interventions to be handled by skilled persons only.<br />
The UV Wand System generates high intensity UV radiation that, with direct<br />
exposure, can damage skin and eyes in a short time.<br />
Only an authorized service center representative may repair the unit.<br />
The energy emitted from the end of the light guide can heat any surface that it is<br />
directed at. Care must be taken to determine the proper offset distance and<br />
exposure time.<br />
In case of malfunctions of the shutter, avoid direct radiation of the skin under all<br />
circumstances!<br />
Avoid direct radiation of the skin and eyes under all circumstances!<br />
Wear UV protective glasses and UV protective gloves!<br />
Damage to the power cord or the housing can result in contact with live electrical<br />
parts.<br />
Check the power cord and the unit before each use.<br />
If the power cord or the unit is damaged, do not operate!<br />
Replace a damaged power cord with a new one.<br />
Observe general safety regulations for the handling of chemicals!<br />
Observe manufacturer’s instructions!<br />
Request a safety data sheet for the LOCTITE-product used!<br />
1.4 Please consider the following points:<br />
1.4.1 General Instructions<br />
– Be sure to pull power plug before opening the equipment!<br />
– Never operate system while housing is open!<br />
– Provided that the system is operated properly, UV radiation is blocked off completely,<br />
eliminating any danger to operators. Make sure to avoid direct irradiation when doing<br />
installation on the equipment!