UVA 97033 UVC 97034 - Henkel
UVA 97033 UVC 97034 - Henkel
UVA 97033 UVC 97034 - Henkel
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
4 Installation<br />
4.4 Lamp Module Disassembly<br />
Disassemble the lamp module by reversed procedure of section 4.3.<br />
For a transport of the system the lamp has<br />
to be secured against damage. The<br />
transport safety cushions has to be<br />
reintegrated.<br />
Mount the cushions very careful since<br />
otherwise the lamp can break!<br />
• Press the cushions against the sidewall<br />
of the module to get with a part of them<br />
under the lamp. Then release the<br />
cushions.<br />
4.5 Resetting lamp operating hours<br />
Be sure to reset the elapsed time meter of the lamp to zero after replacing the lamp.<br />
This menu also indicates the operating hours of the unit, which however cannot be reset.<br />
• Push the MENU button to get to the<br />
main menu.<br />
• Push the UP or DOWN button to get to<br />
the OPERATING HOURS menu option.<br />
• Push SELECT button.<br />
• The status LED extinguishes.<br />
• Push OK button to cancel the<br />
operation.<br />
The main window appears when reset<br />
has been cancelled.<br />
OR<br />
• Push ZERO button to reset lampoperating<br />
hours.<br />
If OK button is pushed for confirmation,<br />
the lamp operating hours are not reset.<br />
The LED lights up.<br />
• Push NO or YES button to confirm the<br />
operation as relevant<br />
• The status LED lights up.<br />
19
Change language