Bedienung Java-Client (1.00) - Guntermann und Drunck GmbH

Adjusting the phase position
Video profiles
The setting of the phase position is an important setting to properly process the
video signal.
ADVICE: The Auto phase function automatically executes the phase setting.
To properly perform this function, a static image (for example of the desktop) has
to be output by the target.
This function cannot be performed if the screensaver is activated on the target!
How to change the preset phase setting:
1. Select the manually option in the Settings paragraph.
2. Adjust the value according to your needs.
ADVICE: If possible, display a vertically hatched image or an image with many
vertical lines at the target. Now, optimise the phase value to that effect that the
lines are evenly and sharply displayed.
It is recommended not to enter the numeric values directly at the keyboard but to
use the arrow keys.
ADVICE: If the display directly function (see page 18) is activated, you can change
the settings and, at the same time, view the result in the client window.
3. Optional: If desired, activate the Noise suppression option.
NOTE: Click Undo to activate the default values of this tab.
G&D UCON-IP-NEO · 21