Bedienung Java-Client (1.00) - Guntermann und Drunck GmbH
Bedienung Java-Client (1.00) - Guntermann und Drunck GmbH Bedienung Java-Client (1.00) - Guntermann und Drunck GmbH
Video profiles Defining color values The Colors tab enables you to individually adjust the color values and the brightness of the image. ADVICE: If you want this tab’s settings to be automatically determined, click on Image position recognition. The following settings can be optimised: Red: sets the color values for the color red Green: sets the color values for the color green Blue: sets the color values for the color blue Synchronize color settings: Activate this option if you want to adjust the contrast. When the color value is changed, the other two colors are adjusted as well. If this function is deactivated (default), you can change the weight of the single colors, for example to correct a color fault in the image. Brightness: adjusts the basic brightness of the image How to change the preset values: 1. Use the slider to adjust the color values and the brightness. It is also possible to enter the values directly to the particular input fields. ADVICE: If the display directly function (see page 18) is activated, you can change the settings and, at the same time, view the result in the client window. NOTE: Click Undo to activate the default values of this tab. 20 · G&D UCON-IP-NEO
Adjusting the phase position Video profiles The setting of the phase position is an important setting to properly process the video signal. ADVICE: The Auto phase function automatically executes the phase setting. To properly perform this function, a static image (for example of the desktop) has to be output by the target. This function cannot be performed if the screensaver is activated on the target! How to change the preset phase setting: 1. Select the manually option in the Settings paragraph. 2. Adjust the value according to your needs. ADVICE: If possible, display a vertically hatched image or an image with many vertical lines at the target. Now, optimise the phase value to that effect that the lines are evenly and sharply displayed. It is recommended not to enter the numeric values directly at the keyboard but to use the arrow keys. ADVICE: If the display directly function (see page 18) is activated, you can change the settings and, at the same time, view the result in the client window. 3. Optional: If desired, activate the Noise suppression option. NOTE: Click Undo to activate the default values of this tab. G&D UCON-IP-NEO · 21
- Seite 5 und 6: Der Java Client Der Java Client Der
- Seite 7 und 8: Erste Schritte Eine Verbindung zum
- Seite 9 und 10: Informationen der Statuszeile Erste
- Seite 11 und 12: Umschalten zwischen den Zielrechner
- Seite 13 und 14: Verbindungsaufbau Verbindungsaufbau
- Seite 15 und 16: Das Steuerboard Das Steuerboard Das
- Seite 17 und 18: Das Steuerboard Aufschaltung auf de
- Seite 19 und 20: Anzeige des On-Screen-Displays übe
- Seite 21 und 22: Videoeinstellungen Videoeinstellung
- Seite 23 und 24: Folgende Einstellungen können von
- Seite 25 und 26: Einstellung der Phasenlage Videoein
- Seite 27 und 28: Videofunktionen Videofunktionen Aut
- Seite 29 und 30: Mausbremse Mausbremse Viele Betrieb
- Seite 31 und 32: Verschlüsselung Erweiterte Funktio
- Seite 33 und 34: NOTIZEN
- Seite 35 und 36: Contents Contents The Java client .
- Seite 37 und 38: The Java client The Java client The
- Seite 39 und 40: Getting started Establishing a conn
- Seite 41 und 42: Information in the status bar The s
- Seite 43 und 44: Switching between targets Getting s
- Seite 45 und 46: Establishing a connection Establish
- Seite 47 und 48: Control panel Control panel The con
- Seite 49 und 50: Accessing the last target (Last Tar
- Seite 51 und 52: Displaying the on-screen display vi
- Seite 53 und 54: Video profiles Video profiles When
- Seite 55: The following settings can be indiv
- Seite 59 und 60: Video functions Video functions Aut
- Seite 61 und 62: Mouse delay Many operating systems
- Seite 63 und 64: Encryption Advanced functions IMPOR
- Seite 65 und 66: NOTES
- Seite 67 und 68: NOTES
Video profiles<br />
Defining color values<br />
The Colors tab enables you to individually adjust the color values and the brightness<br />
of the image.<br />
ADVICE: If you want this tab’s settings to be automatically determined, click on<br />
Image position recognition.<br />
The following settings can be optimised:<br />
Red: sets the color values for the color red<br />
Green: sets the color values for the color green<br />
Blue: sets the color values for the color blue<br />
Synchronize<br />
color settings:<br />
Activate this option if you want to adjust the contrast. When the<br />
color value is changed, the other two colors are adjusted as well.<br />
If this function is deactivated (default), you can change the<br />
weight of the single colors, for example to correct a color fault<br />
in the image.<br />
Brightness: adjusts the basic brightness of the image<br />
How to change the preset values:<br />
1. Use the slider to adjust the color values and the brightness.<br />
It is also possible to enter the values directly to the particular input fields.<br />
ADVICE: If the display directly function (see page 18) is activated, you can change<br />
the settings and, at the same time, view the result in the client window.<br />
NOTE: Click Undo to activate the default values of this tab.<br />
20 · G&D UCON-IP-NEO