Bedienung Java-Client (1.00) - Guntermann und Drunck GmbH

Video profiles
Setting options
The user is enabled to edit the profile’s video settings. The following pages describe
the settings that are provided on the different tabs of the window.
The lower window section is identical on all tabs:
The left corner displays the number of image updates per second in the client window
(image frequency) as well as the data transfer rate (in kilobyte per second)
between KVM matrix system and Java client.
The following operating elements can also be found in this section:
display directly: changes in the settings are immediately applied to the image
screen in the client window
Test: applies changes in the settings for the display screen in the client
window
Refresh: synchronizes the transmitted image of the target
Cancel: cancels changes in the settings and close window
Close: temporarily saves settings until the target is accessed again
Save: save settings
Undo: undo all changes since last saving
Defining the image width, position and size
The Image tab enables you to define the image width, the position and the size.
ADVICE: If you want this tab’s settings to be automatically determined, click on
Image position recognition.
The following requirements are necessary to execute this function reliably:
The screen resolution of the target is lower than the resolution of the client window.
The setting of the frames of the currently accessing target computer lie within a
gegnerated size (depending on the image resolution).
18 · G&D UCON-IP-NEO