G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
User module »DVI-CON«<br />
Power supply<br />
Main Power: Connect the power cable to the power pack and a power outlet.<br />
Red. Power: If required, connect the power cable of the optional power pack to this<br />
interface. This provides a red<strong>und</strong>ant power supply. Connect the power cable with<br />
the power pack and a power outlet of a different power circuit.<br />
LED Out: If you expanded the functional range of the matrix switch by purchasing the<br />
TradeSwitch function, connect the optional TS-LED-2 (order number A6100041) to this<br />
interface.<br />
Start-up<br />
Start the user module by pressing the Main Power button of the power pack.<br />
ADVICE: The active hotkey configuration is displayed during the System Startup of<br />
the user module.<br />
Status displays<br />
Front panel<br />
The LEDs on the front panel of the user module inform you about the system’s<br />
operating status.<br />
Section LED Status Meaning<br />
Power Red. on The optional power pack is connected and the required voltage<br />
(12 Volt) is available.<br />
off The optional power pack is not (properly) connected.<br />
Main on The power supply provides the required voltage.<br />
off The power button is turned off or the connection with the mains<br />
could not be established.<br />
Check the proper connection of the power supply cable.<br />
35 · G&D <strong>DVICenter</strong><br />
Power Status Console<br />
Red.<br />
Main<br />
Trans.<br />
System<br />
Video<br />
K/M<br />
Service