Vicon 2 Power Module / Touch Panel - Truma Gerätetechnik GmbH ...

Touch Panel connection
Only connection the Touch Panel (TP) using a Y-adapter (Y) to
a Power Module (PM).
Install the Y-adapter (part no. C30000-03300) in a place (wall
or floor) protected against moisture and wetness close to
the Power Module (PM). Fix the Y-adapter with cable ties if
necessary.
+Y
10
PM
COM1
COM1
COM2
-Y
Y
TP
The Y-adapter connection cables may not be extended.
Connecting the Truma Combi heating
A TIN cable is necessary for connection of the heating to the
COM3 connection of a module (PM).
PM
CAN
COM3
COM1
COM2
COM3
PM
CAN CAN
TIN
COM1
COM2
Combi
PM
TIN TIN cable 3 m (part no. C30000-05000)
TIN cable 6 m (part no. C30000-05100)
COM1
COM2
R
R
Connecting the Alde Compact 3010 heating
An interface (AVI) is necessary to connection the Alde heating
Compact 3010 to the Vicon 2 bus system.
Connect the device using the interface with COM3 of a
module (PM).
PM
CAN
The Alde room temperature sensor (A) must be
connected at the AVI.
COM3
COM1
COM2
COM3
PM
TIN
CAN CAN
COM1
COM2
AVI
PM
Alde
Compact
3010
A Alde Room temperature sensor
AVI Alde-Vicon-Interface (part no. C30000-03500)
TIN TIN cable 3 m (part no. C30000-05000)
TIN cable 6 m (part no. C30000-05100)
Adaption / consumers connection
Adaption of the connection (of consumers) only takes
place through the vehicle manufacturer.
A
COM1
COM2
R