ekey home integra Bedienungsanleitung Steuereinheit ... - Gueller.ch
ekey home integra Bedienungsanleitung Steuereinheit ... - Gueller.ch
ekey home integra Bedienungsanleitung Steuereinheit ... - Gueller.ch
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Problem Cause Solution<br />
Error code “E2“on the<br />
display<br />
Error code "E3" on the<br />
display<br />
The green LED on the<br />
scanner is signalling a<br />
positive identification,<br />
however the relay is not<br />
released.<br />
Status LEDs blink green and<br />
red in the finger scanner.<br />
40<br />
Incorrect security code has<br />
been entered three times. 30<br />
min. lock-out.<br />
Wait for 30 min, enter<br />
the correct security code<br />
again.<br />
Wrong device coupling Couple the devices again,<br />
one of them has been<br />
manipulated.<br />
Wrong unit coupling.<br />
The finger is not accepted,<br />
as a device has been<br />
swapped.<br />
Possible problem or damage<br />
on the sensor.<br />
Couple the devices again,<br />
one of them has been<br />
manipulated.<br />
Reset the device before<br />
coupling it (see 3.9).<br />
Contact our support<br />
department. Take care that<br />
you have the serial number<br />
of all units at hand (<strong>ch</strong>eck<br />
the barcode stickers). For<br />
contact data <strong>ch</strong>eck page 29.