agc-4-parameter-list-4189340688-uk

4040 Pt100 93.2 (requires option M16.6)
No. Setting Range Factory
setting
Description
4041 Pt100 93.2 Set point -49 to 482 °C 80 °C Three different input types are
4042 Pt100 93.2 Timer 0.0 to 600.0 s 120.0 s
available with Option M16.6:
• 4-20 mA
4043 Pt100 93.2 Relay output A Not used (option Not used
• 0-5 V
dependent)
• Pt100
4044 Pt100 93.2 Relay output B Not used (option Not used
The value shown in this
dependent)
parameter group is available
4045 Pt100 93.2 Enable OFF
ON
OFF
when Pt100 is selected in
parameter 11130.
4046 Pt100 93.2 Fail class F1 to F9 F2 (Warning)
4050 Wire fail 93 (requires option M16.6)
No. Setting Range Factory
setting
Description
4051 Wire fail ana
93
4052 Wire fail ana
93
Relay output A
Relay output B
Not used (option
dependent)
Not used (option
dependent)
Not used
Not used
For function description of wire
fail, see the Option M16
manual.
4053 Wire fail ana
93
Enable
OFF
ON
OFF
4054
Wire fail ana
93
Fail class F1 to F9 F2 (Warning)
4060 4-20 mA 95.1 (requires option M16.6)
No. Setting Range Factory
setting
Description
4061 4-20 mA 95.1 Set point 4 to 20 mA 10 mA Three different input types are
4062 4-20 mA 95.1 Timer 0.0 to 600.0 s 120.0 s
available with Option M16.6:
• 4-20 mA
4063 4-20 mA 95.1 Relay output A Not used (option Not used
• 0-5 V
dependent)
• Pt100
4044 4-20 mA 95.1 Relay output B Not used (option Not used
The value shown in this
dependent)
parameter group is available
4065 4-20 mA 95.1 Enable OFF
ON
OFF
when 4-20 mA is selected in
parameter 11140.
4066 4-20 mA 95.1 Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 75 of 222