You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4090 4-20 mA 97.1 (requires option M15.6)
No. Setting Range Factory
setting
Description
4091 4-20 mA 97.1 Set point 4 to 20 mA 10 mA Configurable analogue input.
4092 4-20 mA 97.1 Timer 0.0 to 600.0 s 120.0 s
Option M15.6: 4 x 4-20 mA
inputs.
4093 4-20 mA 97.1 Relay output A Not used (option
dependent)
Not used
4094 4-20 mA 97.1 Relay output B Not used (option
dependent)
4095 4-20 mA 97.1 Enable OFF
ON
Not used
OFF
4096 4-20 mA 97.1 Fail class F1 to F9 F2 (Warning)
4100 4-20 mA 97.2 (requires option M15.6)
No. Setting Range Factory
setting
Description
4101 4-20 mA 97.2 Set point 4 to 20 mA 10 mA Configurable analogue input.
4102 4-20 mA 97.2 Timer 0.0 to 600.0 s 120.0 s
Option M15.6: 4 x 4-20 mA
inputs.
4103 4-20 mA 97.2 Relay output A Not used (option
dependent)
Not used
4104 4-20 mA 97.2 Relay output B Not used (option
dependent)
4105 4-20 mA 97.2 Enable OFF
ON
Not used
OFF
4106 4-20 mA 97.2 Fail class F1 to F9 F2 (Warning)
4110 Wire fail 4-20 mA 97 (requires option M15.6)
No. Setting Range Factory
setting
Description
4111 Wire fail ana
97
4112 Wire fail ana
97
4113 Wire fail ana
97
Relay output A
Relay output B
Enable
Not used (option
dependent)
Not used (option
dependent)
OFF
ON
Not used
Not used
OFF
The wire fault will detect if the
current drops below 2 mA or
exceeds 22 mA. In both cases
the alarm will be activated.
Option M15.6: 4 x 4-20 mA
inputs.
4114
Wire fail ana
97
Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 66 of 222