agc-4-parameter-list-4189340688-uk

4060 4-20 mA 95.1 (requires option M15.6)
No. Setting Range Factory
setting
Description
4061 4-20 mA 95.1 Set point 4 to 20 mA 10 mA Configurable analogue input.
4062 4-20 mA 95.1 Timer 0.0 to 600.0 s 120.0 s
Option M15.6: 4 x 4-20 mA
inputs.
4063 4-20 mA 95.1 Relay output A Not used (option
dependent)
Not used
4064 4-20 mA 95.1 Relay output B Not used (option
dependent)
4065 4-20 mA 95.1 Enable OFF
ON
Not used
OFF
4066 4-20 mA 95.1 Fail class F1 to F9 F2 (Warning)
4070 4-20 mA 95.2 (requires option M15.6)
No. Setting Range Factory
setting
Description
4071 4-20 mA 95.2 Set point 4 to 20 mA 10 mA Configurable analogue input.
4072 4-20 mA 95.2 Timer 0.0 to 600.0 s 120.0 s
Option M15.6: 4 x 4-20 mA
inputs.
4073 4-20 mA 95.2 Relay output A Not used (option
dependent)
Not used
4074 4-20 mA 95.2 Relay output B Not used (option
dependent)
4075 4-20 mA 95.2 Enable OFF
ON
Not used
OFF
4076 4-20 mA 95.2 Fail class F1 to F9 F2 (Warning)
4080 Wire fail 4-20 mA 95 (requires option M15.6)
No. Setting Range Factory
setting
Description
4081 Wire fail ana
95
4082 Wire fail ana
95
4083 Wire fail ana
95
Relay output A
Relay output B
Enable
Not used (option
dependent)
Not used (option
dependent)
OFF
ON
Not used
Not used
OFF
The wire fault will detect if the
current drops below 2 mA or
exceeds 22 mA. In both cases
the alarm will be activated.
Option M15.6: 4 x 4-20 mA
inputs.
4084
Wire fail ana
95
Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 65 of 222