You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4030 4-20 mA 93.1 (requires option M15.6)
No. Setting Range Factory
setting
Description
4031 4-20 mA 93.1 Set point 4 to 20 mA 10 mA Configurable analogue input.
4032 4-20 mA 93.1 Timer 0.0 to 600.0 s 120.0 s
Option M15.6: 4 x 4-20 mA
inputs.
4033 4-20 mA 93.1 Relay output A Not used (option
dependent)
Not used
4034 4-20 mA 93.1 Relay output B Not used (option
dependent)
4035 4-20 mA 93.1 Enable OFF
ON
Not used
OFF
4036 4-20 mA 93.1 Fail class F1 to F9 F2 (Warning)
4040 4-20 mA 93.2 (requires option M15.6)
No. Setting Range Factory
setting
Description
4041 4-20 mA 93.2 Set point 4 to 20 mA 10 mA Configurable analogue input.
4042 4-20 mA 93.2 Timer 0.0 to 600.0 s 120.0 s
Option M15.6: 4 x 4-20 mA
inputs.
4043 4-20 mA 93.2 Relay output A Not used (option
dependent)
Not used
4044 4-20 mA 93.2 Relay output B Not used (option
dependent)
4045 4-20 mA 93.2 Enable OFF
ON
Not used
OFF
4046 4-20 mA 93.2 Fail class F1 to F9 F2 (Warning)
4050 Wire fail 4-20 mA 93 (requires option M15.6)
No. Setting Range Factory
setting
Description
4051 Wire fail ana
93
4052 Wire fail ana
93
4053 Wire fail ana
93
Relay output A
Relay output B
Enable
Not used (option
dependent)
Not used (option
dependent)
OFF
ON
Not used
Not used
OFF
The wire fault will detect if the
current drops below 2 mA or
exceeds 22 mA. In both cases
the alarm will be activated.
Option M15.6: 4 x 4-20 mA
inputs.
4054
Wire fail ana
93
Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 64 of 222