agc-4-parameter-list-4189340688-uk

2.3 Control parameters: Synchronisation
2.3.1 Synchronisation and breaker alarms
2120 Synchronisation window
No. Setting Range Factory
setting
Description
2121 Sync. window Set point 2.0 to 20.0 % 15.0 % The alarm will activate if the
2122 Sync. window Timer 0.1 to 2.0 s 0.5 s
actual voltage deviates from
nominal voltage with the set
2123 Sync. window Relay output A Not used (option
dependent)
Not used percentage.
2124 Sync. window Relay output B Not used (option
dependent)
2125 Sync. window Enable OFF
ON
Not used
OFF
2130 GB/TB/BTB breaker synchronisation failure
No. Setting Range Factory
setting
Description
2131 GB/TB/BTB
sync. failure
2132 GB/TB/BTB
sync. failure
Timer 5.0 to 999.9 s 60.0 s The controller has
unsuccessfully tried to
Relay output A
Not used (option
dependent)
Not used
synchronise the breaker to the
busbar within the delay time.
2133 GB/TB/BTB
sync. failure
Relay output B
Not used (option
dependent)
Not used
2134 GB/TB/BTB
sync. failure
Enable
OFF
ON
OFF
2135
GB/TB/BTB
sync. failure
Fail class F1 to F9 F1 (Block)
2140 Mains breaker synchronisation failure
No. Setting Range Factory
setting
Description
2141 MB sync.
failure
2142 MB sync.
failure
Timer 5.0 to 999.9 s 60.0 s The controller has
unsuccessfully tried to
Relay output A
Not used (option
dependent)
Not used
synchronise the breaker to the
busbar within the delay time.
2143 MB sync.
failure
Relay output B
Not used (option
dependent)
Not used
2144 MB sync.
failure
Enable
OFF
ON
ON
2145
MB sync.
failure
Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 40 of 222