agc-4-parameter-list-4189340688-uk

1900 NEL 2 high overload
No. Setting Range Factory
setting
Description
1901 NEL 2 P>> Set point 10.0 to 200.0 % 110.0 % Trip of non-essential load due
1902 NEL 2 P>> Timer 0.1 to 999.9 s 1.0 s
to high overload. This function
activates NEL group 2.
1903 NEL 2 P>> Enable OFF
ON
OFF
1910 NEL 3 high overload
No. Setting Range Factory
setting
Description
1911 NEL 3 P>> Set point 10.0 to 200.0 % 110.0 % Trip of non-essential load due
1912 NEL 3 P>> Timer 0.1 to 999.9 s 1.0 s
to high overload. This function
activates NEL group 3.
1913 NEL 3 P>> Enable OFF
ON
OFF
2.2.22 Under-voltage and reactive power low
1960 U and Q < 1 (with option A1)
No. Setting Range Factory
setting
Description
1961 U and Q < 1 Set point 40.0 to 100.0 % 85.0 % The setting relates to the
1962 U and Q < 1 Timer 0.1 to 3200.0 s 0.5 s
1963 U and Q < 1 Relay output A Not used (option
dependent)
1964 U and Q < 1 Relay output B Not used (option
dependent)
Not used
Not used
genera- tor nominal voltage.
The condition for trip is that the
actual voltage drops below the
setting value and the reactive
power is ≤ 0 kvar.
1965 U and Q < 1 Enable OFF
ON
OFF
1966 U and Q < 1 Fail class F1 to F9 F2 (Warning)
1970 U and Q < 2 (with option A1)
No. Setting Range Factory
setting
Description
1971 U and Q < 2 Set point 40.0 to 100.0 % 85.0 % The setting relates to the
1972 U and Q < 2 Timer 0.1 to 3200.0 s 0.5 s
1973 U and Q < 2 Relay output A Not used (option
dependent)
1974 U and Q < 2 Relay output B Not used (option
dependent)
Not used
Not used
genera- tor nominal voltage.
The condition for trip is that the
actual voltage drops below the
setting value and the reactive
power is ≤ 0 kvar.
1975 U and Q < 2 Enable OFF
ON
OFF
1976 U and Q < 2 Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 38 of 222