agc-4-parameter-list-4189340688-uk

1410 Busbar under-frequency 4
No. Setting Range Factory
setting
Description
1411
1412
1413
BB f< 4
BB f< 4
BB f< 4
Set point
Timer
Relay output A
80.0 to 100.0 %
0.0 to 99.99 s
Not used (option
dependent)
95.0 %
5.0 s
Not used
The alarm and fail class are
activated when the frequency
has been continuously under
the programmed value during
the programmed delay.
1414 BB f< 4 Relay output B Not used (option
dependent)
1415 BB f< 4 Enable OFF
ON
Not used
OFF
With option A10: Timer
maximum is 2000.0 s.
1416 BB f< 4 Fail class F1 to F9 F2 (Warning)
1920 Busbar over-frequency 4
No. Setting Range Factory
setting
Description
1921 BB f> 4 Set point 100.0 to 120.0 % 102.0 % The alarm and fail class are
1922 BB f> 4 Timer 1500 to 6000 s 5600 s
activated when the frequency
has been continuously above
1923 BB f> 4 Relay output A Not used (option
dependent)
Not used the programmed value during
the programmed delay.
1924 BB f> 4 Relay output B Not used (option
dependent)
1925 BB f> 4 Enable OFF
ON
Not used
OFF
1926 BB f> 4 Fail class F1 to F9 F2 (Warning)
1930 Busbar under-frequency 5
No. Setting Range Factory
setting
Description
1931 BB f< 5 Set point 80.0 to 100.0 % 95.0 % The alarm and fail class are
1932 BB f< 5 Timer 1500 to 6000 s 5600 s
activated when the frequency
has been continuously under
1933 BB f< 5 Relay output A Not used (option
dependent)
Not used the programmed value during
the programmed delay.
1934 BB f< 5 Relay output B Not used (option
dependent)
1935 BB f< 5 Enable OFF
ON
Not used
OFF
1936 BB f< 5 Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 24 of 222