agc-4-parameter-list-4189340688-uk

1350 Busbar over-frequency 1
No. Setting Range Factory
setting
Description
1351 BB f> 1 Set point 100.0 to 120.0 % 103.0 % The alarm and fail class are
1352 BB f> 1 Timer 0.0 to 99.99 s 10.0 s
activated when the frequency
has been continuously above
1353 BB f> 1 Relay output A Not used (option
dependent)
Not used the programmed value during
the programmed delay.
1354 BB f> 1 Relay output B Not used (option
dependent)
1355 BB f> 1 Enable OFF
ON
Not used
OFF
1356 BB f> 1 Fail class F1 to F9 F2 (Warning)
1360 Busbar over-frequency 2
No. Setting Range Factory
setting
Description
1361 BB f> 2 Set point 100.0 to 120.0 % 105.0 % The alarm and fail class are
1362 BB f> 2 Timer 0.0 to 99.99 s 5.0 s
activated when the frequency
has been continuously above
1363 BB f> 2 Relay output A Not used (option
dependent)
Not used the programmed value during
the programmed delay.
1364 BB f> 2 Relay output B Not used (option
dependent)
1365 BB f> 2 Enable OFF
ON
Not used
OFF
1366 BB f> 2 Fail class F1 to F9 F2 (Warning)
1370 Busbar over-frequency 3
No. Setting Range Factory
setting
Description
1371
1372
1373
BB f> 3
BB f> 3
BB f> 3
Set point
Timer
Relay output A
100.0 to 120.0 %
0.0 to 99.99 s
Not used (option
dependent)
105.0 %
5.0 s
Not used
The alarm and fail class are
activated when the frequency
has been continuously above
the programmed value during
the programmed delay.
1374 BB f> 3 Relay output B Not used (option
dependent)
1375 BB f> 3 Enable OFF
ON
Not used
OFF
With option A10: Timer
maximum is 2000.0 s.
1376 BB f> 3 Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 22 of 222