agc-4-parameter-list-4189340688-uk

2570 Frequency control relay output
No. Setting Range Factory
setting
Description
2571 f control relay Dead band 0.2 to 10.0 % 1.0 % These parameters are only
2572 f control relay Kp 0 to 100 10
applicable if Relay is selected
in parameter 2781.
2573 f droop relay Droop setting 0 to 10 % 0 %
The droop setting will be
applied on top of the regulation
output.
2580 Power control relay output
No. Setting Range Factory
setting
Description
2581 P control
relay
2582
P control
relay
Dead band 0.2 to 10.0 % 2.0 % These parameters are only
applicable if Relay is selected
in parameter 2781.
Kp 0 to 100 10
2590 Load sharing control relay output
No. Setting Range Factory
setting
Description
2591 LS ctrl. relay f dead band 0.2 to 10.0 % 1.0 % These parameters are only
2592 LS ctrl. relay LS Kp 0 to 100 10
applicable if Relay is selected
in parameter 2781.
2593 LS ctrl. relay P dead band 0.2 to 10.0 % 2.0 %
2594 LS ctrl. relay P weight 0.0 to 100.0 % 10.0 %
2600 Relay control
No. Setting Range Factory
setting
Description
2601
2602
Relay control
Relay control
GOV ON time
GOV period time
10 to 6500 ms
50 to 32500 ms
500 ms
2500 ms
These parameters are only
applicable if Relay is selected
in parameter 2781.
2603 Relay control
Relay output A Not used (option
(Increase relay) dependent)
Not used
2604 Relay control
Relay output B (Decrease
relay)
Not used (option
dependent)
Not used
NOTE: In the PC utility
software, settings 2603/2604
are found under menu 2602.
PARAMETER LIST 4189340688R EN Page 197 of 222