agc-4-parameter-list-4189340688-uk

2040 Frequency synchronisation control analogue (requires option E1, E2, EF2, EF4, EF5)
No. Setting Range Factory
setting
Description
2041 f sync. f Kp 0.00 to 60.00 2.50 PID controller for dynamic
2042 f sync. f Ti 0.00 to 60.00 s 1.50 s
sync. These parameters are
only applicable if Analogue or
2043 f sync. f Td 0.00 to 2.00 s 0.00 s
EIC is selected in parameter
2780.
2050 Frequency synchronisation control relay
No. Setting Range Factory
setting
Description
2051 f sync. Kp 0 to 100 10 This parameter is only
applicable if Relay is selected
in parameter 2780.
2060 Phase sync. analogue
No. Setting Range Factory
setting
Description
2061 Phase sync. Phase Kp 0.00 to 60.00 0.50 PID controller for static sync.
2062 Phase sync. Phase Ti 0.00 to 60.00 s 3.00 s
These parameters are only
applicable if Analogue or EIC is
2063 Phase sync. Phase Td 0.00 to 2.00 s 0.00 s selected in parameter 2780.
2070 Phase control relay
No. Setting Range Factory
setting
Description
2071 Phase Kp 0 to 100 10 This parameter is only
applicable if Relay is selected
in parameter 2780.
2110 Synchronisation blackout
No. Setting Range Factory
setting
Description
2111 Sync.
blackout
2112
2113
Sync.
blackout
Sync.
blackout
dF min.
dF max.
0.0 to 5.0 Hz
0.0 to 5.0 Hz
3.0 Hz
3.0 Hz
Accepted limits for black
closing of the breaker (or start
of synchronisation) in each
direction of nominal frequency
and voltage.
dU min. 2 to 20 % 5 %
2114
Sync.
blackout
dU max. 2 to 20 % 5 %
2240 Separate synchronisation relay
No. Setting Range Factory
setting
Description
2241 Sep. sync.
relay
2242
Sep. sync.
relay
Relay output A
Relay output B
Not used (option
dependent)
Not used (option
dependent)
Not used
Not used
The output activates during
synchronisation and thereby a
separate synchronising unit
can be activated.
PARAMETER LIST 4189340688R EN Page 194 of 222