agc-4-parameter-list-4189340688-uk

1240 G/M/BA under-frequency 1
No. Setting Range Factory
setting
Description
1241 G/M/BA f< 1 Set point 80.0 to 100.0 % 97.0 % The alarm and fail class are
1242 G/M/BA f< 1 Timer 0.2 to 100.0 s 10.0 s
activated when the frequency
has been continuously under
1243 G/M/BA f< 1 Relay output A Not used (option
dependent)
Not used the programmed value during
the programmed delay.
1244 G/M/BA f< 1 Relay output B Not used (option
dependent)
1245 G/M/BA f< 1 Enable OFF
ON
Not used
OFF
1246 G/M/BA f< 1 Fail class F1 to F9 F2 (Warning)
1250 G/M/BA under-frequency 2
No. Setting Range Factory
setting
Description
1251 G/M/BA f< 2 Set point 80.0 to 100.0 % 95.0 % The alarm and fail class are
1252 G/M/BA f< 2 Timer 0.2 to 100.0 s 5.0 s
activated when the frequency
has been continuously under
1253 G/M/BA f< 2 Relay output A Not used (option
dependent)
Not used the programmed value during
the programmed delay.
1254 G/M/BA f< 2 Relay output B Not used (option
dependent)
1255 G/M/BA f< 2 Enable OFF
ON
Not used
OFF
1256 G/M/BA f< 2 Fail class F1 to F9 F2 (Warning)
1260 G/M/BA under-frequency 3
No. Setting Range Factory
setting
Description
1261 G/M/BA f< 3 Set point 80.0 to 100.0 % 95.0 % The alarm and fail class are
1262 G/M/BA f< 3 Timer 0.2 to 100.0 s 5.0 s
activated when the frequency
has been continuously under
1263 G/M/BA f< 3 Relay output A Not used (option
dependent)
Not used the programmed value during
the programmed delay.
1264 G/M/BA f< 3 Relay output B Not used (option
dependent)
1265 G/M/BA f< 3 Enable OFF
ON
Not used
OFF
1266 G/M/BA f< 3 Fail class F1 to F9 F2 (Warning)
2.2.5 Busbar voltage protections
Voltage settings relate to the nominal voltage setting.
PARAMETER LIST 4189340688R EN Page 18 of 222