You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7950 KL320x config (requires option H8)
No. Setting Range Factory
setting
Description
7951 KL320x config Module 1 Pt100 (2 or 3 wire)
7952 KL320x config Module 2
Pt1000 (2 or 3 wire)
10-3200 Ω (2 wire)
7953 KL320x config Module 3
10-1200 Ω (2 wire)
7954 KL320x config Module 4
Pt100 (2 or 3
wire)
Selection for analogue
modules.
The selections for KL
3202/3204 cannot be changed.
After changing module type,
the parameter list in the PC
USW must be uploaded again.
7970 CAN 1 (requires option H8.2)
No. Setting Range Factory
setting
7971 CAN 1 Type OFF
Beckhoff comm.
7972 CAN 1 Baud
50k Baud
125k Baud
250k Baud
7973 CAN 1 ID 10 to 64 10
7974 CAN 1 Reset
OFF
ON
OFF
125k Baud
OFF
Description
This menu is only active if
option H8.2 is activated.
After changing type, the
parameter list in the PC USW
must be uploaded again.
Menu 7974 is for reestablishing
communication after a fault/
disconnection.
7980 CAN 2 (requires option H8.8)
No. Setting Range Factory
setting
7981 CAN 2 Type OFF
Beckhoff comm.
7982 CAN 2 Baud
50k Baud
125k Baud
250k Baud
7983 CAN 2 ID 10 to 64 10
7984 CAN 2 Reset
OFF
ON
OFF
125k Baud
OFF
Description
This menu is only active if
option H8.8 is activated.
After changing type, the
parameter list in the PC USW
must be uploaded again.
Menu 7984 is for reestablishing
communication after a fault/
disconnection.
PARAMETER LIST 4189340688R EN Page 173 of 222