agc-4-parameter-list-4189340688-uk

7050 Fixed power settings (Mains controller)
No. Setting Range Factory
setting
Description
7051 Fixed power
settings
7052
7053
7054
Fixed power
settings
Fixed power
settings
Cos phi
reference
Power
Cos phi
0 to 20000 kW
0.10 to 1.00 s
500 kW
0.90
Fixed power parallel with mains
settings. Visibility of these
parameters depends on the
mode selected in parameter
6070.
Cos phi
Cos phi
Inductive
Capacitive
OFF
Fixed for DG(s)
Fixed for imp/exp
Inductive
OFF
For information on how
parameter 7055 works, see
Option A10.
7055
Fixed power
settings
Reference
1 kW : 1 kW
10 kW : 10 kW
100 kW : 100 kW
1000 kW : 1000 kW
1 kW : 1 kW
3.4.4 Mains failure
7060 U Mains Failure
No. Setting Range Factory
setting
Description
7061 U Mains
Failure
Failure delay 0.5 to 990.0 s 5.0 s Parameters 7063 and 7064
relate to the nominal settings.
7062
7063
U Mains
Failure
U Mains
Failure
Mains OK delay 2 to 9900 s 60 s
U<
30 to 100 % of nominal
voltage
90 %
Parameter 7066 refers to the
mean value of the measured
voltage.
7064
U Mains
Failure
U>
100 to 130 % of
nominal voltage
110 %
7065
U Mains
Failure
Mains failure control
Start engine + open
MB
Start engine
Start engine +
open MB
7066
U Mains
Failure
U unbalance 2 to 100 % 100 %
7070 f Mains Failure
No. Setting Range Factory
setting
Description
7071 f Mains
Failure
Failure delay 0.5 to 990.0 s 5.0 s Parameters 7073 and 7074
relate to the nominal settings.
7072
f Mains
Failure
Mains OK delay 2 to 9900 s 60 s
7073
f Mains
Failure
f<
80.0 to 100.0 % of
nominal frequency
95.0 %
7074
f Mains
Failure
f>
100.0 to 120.0 % of
nominal frequency
105.0 %
PARAMETER LIST 4189340688R EN Page 159 of 222