agc-4-parameter-list-4189340688-uk

3.3.2 Cab Message 1 source address
15030 CM1 (requires option H5)
No. Setting Range Factory
setting
Description
15030 Source
address
Set point -1 to 255 -1 If set as -1, the default for the
selected protocol will be used.
See Option H5 H7 H12 H13
for more information.
3.3.3 Generator Control 1 source address
15040 GC1 (requires option H5)
No. Setting Range Factory
setting
Description
15040 Source
address
Set point -1 to 255 -1 If set as -1, the default for the
selected protocol will be used.
See Option H5 H7 H12 H13
for more information.
3.3.4 EIC derate
7550 EIC derate
No. Setting Range Factory
setting
Description
7551 EIC derate Enable Off, On Off See the Designer's reference
handbook for more
information.
3.3.5 Caterpillar/Perkins
15060 EIC Relative Humidity (requires option H5)
No. Setting Range Factory
setting
Description
15061 EIC Relative
Humidity
Set point -100 to 100 % 50 % See Option H5 H7 H12 H13
for more information.
15062
EIC Relative
Humidity
Timer 0 to 100 s 5 s
PARAMETER LIST 4189340688R EN Page 155 of 222