agc-4-parameter-list-4189340688-uk

1160 G/M/BA over-voltage 2
No. Setting Range Factory
setting
Description
1161 G/M/BA U> 2 Set point 100.0 to 120.0 % 105.0 % The alarm and fail class are
1162 G/M/BA U> 2 Timer 0.1 to 100.0 s 5.0 s
activated when the voltage has
been continuously above the
1163 G/M/BA U> 2 Relay output A Not used (option
dependent)
Not used programmed value during the
programmed delay.
1164 G/M/BA U> 2 Relay output B Not used (option
dependent)
1165 G/M/BA U> 2 Enable OFF
ON
Not used
OFF
1166 G/M/BA U> 2 Fail class F1 to F9 F2 (Warning)
1170 G/M/BA under-voltage 1
No. Setting Range Factory
setting
Description
1171 G/M/BA U< 1 Set point 40.0 to 100.0 % 97.0 % The alarm and fail class are
1172 G/M/BA U< 1 Timer 0.1 to 100.0 s 10.0 s
activated when the voltage has
been continuously under the
1173 G/M/BA U< 1 Relay output A Not used (option
dependent)
Not used programmed value during the
programmed delay.
1174 G/M/BA U< 1 Relay output B Not used (option
dependent)
1175 G/M/BA U< 1 Enable OFF
ON
Not used
OFF
1176 G/M/BA U< 1 Fail class F1 to F9 F2 (Warning)
1180 G/M/BA under-voltage 2
No. Setting Range Factory
setting
Description
1181 G/M/BA U< 2 Set point 40.0 to 100.0 % 95.0 % The alarm and fail class are
1182 G/M/BA U< 2 Timer 0.1 to 100.0 s 5.0 s
activated when the voltage has
been continuously under the
1183 G/M/BA U< 2 Relay output A Not used (option
dependent)
Not used programmed value during the
programmed delay.
1184 G/M/BA U< 2 Relay output B Not used (option
dependent)
1185 G/M/BA U< 2 Enable OFF
ON
Not used
OFF
1186 G/M/BA U< 2 Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 15 of 222