agc-4-parameter-list-4189340688-uk

2.10 External I/O parameters
2.10.1 External I/O alarm setup
Alarms based on external I/O modules can only be configured with the PC utility software.
2.10.2 Analogue inputs (requires option H8.x)
12000 Ext. Ain 1.1
No. Setting Range Factory
setting
Description
Ext. Analogue
input 1.1
Ext. Analogue
input 1.1
Set point 0 to 10 10
Timer 0.0 to 600.0 s 10.0 s
Ext. Analogue
input 1.1
Relay output A
Not used (option
dependent)
Not used
Ext. Analogue
input 1.1
Relay output B
Not used (option
dependent)
Not used
Ext. Analogue
input 1.1
Enable
OFF
ON
OFF
Ext. Analogue
input 1.1
Fail class F1 to F9 F2 (Warning)
12010 Ext. Ain 1.1
No. Setting Range Factory
setting
Description
Ext. Analogue
input 1.2
Ext. Analogue
input 1.2
Set point 0 to 10 10
Timer 0.0 to 600.0 s 10.0 s
Ext. Analogue
input 1.2
Relay output A
Not used (option
dependent)
Not used
Ext. Analogue
input 1.2
Relay output B
Not used (option
dependent)
Not used
Ext. Analogue
input 1.2
Enable
OFF
ON
OFF
Ext. Analogue
input 1.2
Fail class F1 to F9 F2 (Warning)
INFO
The same settings apply to external analogue inputs 2-8, menus 12030-12220.
PARAMETER LIST 4189340688R EN Page 128 of 222