agc-4-parameter-list-4189340688-uk

1040 Over-current 2
No. Setting Range Factory
setting
Description
1041 I>2 Set point 50.0 to 200.0 % 120.0 % The alarm and fail class are
1042 I>2 Timer 0.1 to 3200.0 s 5.0 s
activated when the current has
been continuously above the
1043 I>2 Relay output A Not used (option
dependent)
Not used programmed value during the
programmed delay.
1044 I>2 Relay output B Not used (option
dependent)
1045 I>2 Enable OFF
ON
Not used
ON
1046 I>2 Fail class F1 to F9 F3 (Trip GB)
1050 Over-current 3
No. Setting Range Factory
setting
Description
1051 I>3 Set point 50.0 to 200.0 % 115.0 % The alarm and fail class are
1052 I>3 Timer 0.1 to 3200.0 s 10.0 s
activated when the current has
been continuously above the
1053 I>3 Relay output A Not used (option
dependent)
Not used programmed value during the
programmed delay.
1054 I>3 Relay output B Not used (option
dependent)
1055 I>3 Enable OFF
ON
Not used
ON
1056 I>3 Fail class F1 to F9 F3 (Trip GB)
1060 Over-current 4
No. Setting Range Factory
setting
Description
1061 I>4 Set point 50.0 to 200.0 % 120.0 % The alarm and fail class are
1062 I>4 Timer 0.1 to 3200.0 s 5.0 s
activated when the current has
been continuously above the
1063 I>4 Relay output A Not used (option
dependent)
Not used programmed value during the
programmed delay.
1064 I>4 Relay output B Not used (option
dependent)
1065 I>4 Enable OFF
ON
Not used
ON
1066 I>4 Fail class F1 to F9 F3 (Trip GB)
PARAMETER LIST 4189340688R EN Page 12 of 222