agc-4-parameter-list-4189340688-uk

2.2 Protection parameters
2.2.1 Reverse power protections
1000 Reverse power 1
No. Setting Range Factory
setting
Description
1001 -P>1 Set point -200.0 to 0.0 % -5.0 % The alarm and fail class are
1002 -P>1 Timer 0.1 to 100.0 s 5.0 s
activated when the reverse
power has been continuously
1003 -P>1 Relay output A Not used (option
dependent)
Not used above the programmed value
during the programmed delay.
1004 -P>1 Relay output B Not used (option
dependent)
1005 -P>1 Enable OFF
ON
Not used
ON
1006 -P>1 Fail class F1 to F9 F3 (Trip GB)
1010 Reverse power 2
No. Setting Range Factory
setting
Description
1011 -P>2 Set point -200.0 to 0.0 % -5.0 % The alarm and fail class are
1012 -P>2 Timer 0.1 to 100.0 s 10.0 s
activated when the reverse
power has been continuously
1013 -P>2 Relay output A Not used (option
dependent)
Not used above the programmed value
during the programmed delay.
1014 -P>2 Relay output B Not used (option
dependent)
1015 -P>2 Enable OFF
ON
Not used
ON
1016 -P>2 Fail class F1 to F9 F3 (Trip GB)
2.2.2 Over-current protections
1030 Over-current 1
No. Setting Range Factory
setting
Description
1031 I>1 Set point 50.0 to 200.0 % 115.0 % The alarm and fail class are
1032 I>1 Timer 0.1 to 3200.0 s 10.0 s
activated when the current has
been continuously above the
1033 I>1 Relay output A Not used (option
dependent)
Not used programmed value during the
programmed delay.
1034 I>1 Relay output B Not used (option
dependent)
1035 I>1 Enable OFF
ON
Not used
ON
1036 I>1 Fail class F1 to F9 F2 (Warning)
PARAMETER LIST 4189340688R EN Page 11 of 222