Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4540 Running feedback failure
No. Setting Range Factory
setting
Description
4541
Running
feedback
failure
4542 Running
feedback
failure
4543 Running
feedback
failure
Timer 0.0 to 20.0 s 2.0 s
Relay output A
Relay output B
Not used (option
dependent)
Not used (option
dependent)
Not used
Not used
If running is detected on the
frequency (secondary), but the
primary running feedback (for
example, a digital input) has
not detected running, this
alarm will be raised after the
adjusted delay time.
4544 Running
feedback
failure
Enable
OFF
ON
ON
4545
Running
feedback
failure
Fail class F1 to F9 F2 (Warning)
4550 Magnetic pick-up wire break
No. Setting Range Factory
setting
Description
4551 MPU wire
break
4552 MPU wire
break
Relay output A
Relay output B
Not used (option
dependent)
Not used (option
dependent)
Not used
Not used
The wire break monitoring is
only active when the engine is
at stand still.
4553 MPU wire
break
Enable
OFF
ON
OFF
4554
MPU wire
break
Fail class F1 to F9 F2 (Warning)
4560 Hz/voltage failure
No. Setting Range Factory
setting
Description
4561 Hz/V failure Timer 1.0 to 99.0 s 30.0 s If the frequency and voltage
are not within the limits after
4562 Hz/V failure Relay output A Not used (option Not used
the running feedback is
dependent)
received, this alarm will be
4563 Hz/V failure Relay output B Not used (option Not used raised when the delay time has
4564 Hz/V failure Enable
dependent)
OFF
ON
ON
expired. Limits are placed in
menu 2110 (Sync. blackout).
4565 Hz/V failure Fail class F1 to F9
F5
(Shutdown)
PARAMETER LIST 4189340688R EN Page 104 of 222