13.07.2015 Views

Einbauanleitung: Elektroanlage für Anhängevorrichtung ... - MVG

Einbauanleitung: Elektroanlage für Anhängevorrichtung ... - MVG

Einbauanleitung: Elektroanlage für Anhängevorrichtung ... - MVG

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Installation Instructions:Electrical System for Towing Hitch52. Checking / changing the coding of the control unit of the parking brake- Vehicle self-diagnosiso 53 parking brake Vehicle without AutoHold function: code number 11 Vehicle with AutoHold function: code number 12• 07 coding the control unito Enter the code number depending on the vehicle’s extras(with/without AutoHold).53. All: Finally, as at the beginning, perform a system request regarding the “Guided errorlocation” and delete error codes if necessary.54. After encoding, a back-documentation must be carried out via the software versionmanagement as follows! Start guided troubleshooting with the vehicle system test- Function- component selectionSoftware version management• Select conversion/retrofittingoEnter the action code 30F2D in the test program55. Check the trailer function with the help of a suitable test instrument (with load resistors) orwith the help of a trailer.56. If necessary, bind back any excess cables, fasten all cables with cable ties and reinstall allthe parts that were removed.57. Only for 13-pin trailer socket:Using the 3-pin connector for the constant plus extension kit, the functions "Charge lead" and"Ground for charge lead" can be retrofitted. The constant plus extension kit is available fromspecialist shops under the Westfalia part no. 300 025 300 113.24 321 600 391 101 - 013 - 26/09 VW Universal

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!