Einbauanleitung: Elektroanlage für Anhängevorrichtung ... - MVG

Installation Instructions:Electrical System for Towing Hitch46. For vehicles from model year 2009, automatic activation of trailer stabilisation can be checkedas follows when the trailer equipment is connected:- Vehicle self-diagnosticso 03 Brake electronics 011 Measurement values• enter “10” and “Q”o Trailer yes47. Only Touran: When using a trailer, the vehicle’s central fuse, relay and terminal box mustcoded as follows to deactivate the rear fog lamp:• Select vehicle system: 09 Central electronic fuse, relay and terminal boxoIdentification: Continue Select diagnostic function: 007 – Coding (Technical Support 1A)• Select vehicle system: Electrical system control unit Coding langoChange coding value: Byte 8 bit character set x1xxxxxx (x:enter the current values in the input field), To do so, switchto the input mode [BIN].”48. 47. – 51. Only Passat B6 up to and including MY2007:49. Turn off the ignition, pull out the ignition key, wait for 1 minute, and turn on the ignition.50. In order to active the trailer stabilisation, the coding of the control unit of the electronic brakesystem must be changed:- Vehicle self-diagnosiso 03 electronic brake systemo Read out the current code number of the electronic brake system and write it onthe supplied white label. 07 coding the control unit• new code number = old code number + 16384• Write the new code number on the supplied label, too. 03 actuator diagnosis• Press “Next” the brake lights of the vehicle are actuated• Stop the actuator diagnosis- Stick the label with the code numbers into the manual “1.1. Service Plan” in the section“Other Entries of the Garage”.51. Turn off the ignition, pull out the ignition key, wait for 1 minute, and turn on the ignition.VW Universal 321 600 391 101 - 013 - 26/09 23