13.07.2015 Views

Einbauanleitung: Elektroanlage für Anhängevorrichtung ... - MVG

Einbauanleitung: Elektroanlage für Anhängevorrichtung ... - MVG

Einbauanleitung: Elektroanlage für Anhängevorrichtung ... - MVG

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Installation Instructions:Electrical System for Towing Hitch33. All: Insert the red (only 13-pin), red/black and red/blue single cables into the fuse-protectedsides of fuse compartments that are already equipped with terminal 30.34. If there is not a sufficient number fuse compartments that are already equipped with terminal30, the supplied cable adapter can be used (Golf, Jetta, Passat, Octavia, Leon, Superb).35. Golf Plus, Touran, Tiguan: If the original fuse positions 39-41 / 40-42 are to be used and arenot equipped with terminal 30 on the vehicle, the cable adapter can be ordered under theWESTFALIA part no. 921 557 321 002.36. Insert the cable ends of the cable harness and of the supplied cable adapter (identicalcolours) into fuse compartments that are completely free. Connect the multiple-wire contact tothe free contact of the fuse bridge of fuses 32-37 (Passat) or 22-27 (Golf, Jetta, Octavia,Leon) or to a suitable terminal 30.37. Insert the supplied 5A fuses into these fuse compartments.38. Close the lilac latch on the fuse carrier by shifting it and refit the black cover.Checking the correct operation39. Reconnect the battery of the vehicle.40. For vehicles up to the production date week 22/07 using a trailer connection unit with partnumber 300001506558/1K0 907 383 E or higher, the gateway control unit -J533 must be reflashedas follows:Start guided troubleshooting using the vehicle system testFunction- component selection- Bodyworko Bodywork - installation work Trailer detection• Functionso Replace control unit for trailer detection Select country code• continue with menu instructions41. All: The vehicle’s gateway has to be coded as follows using a service tester to extend itsfunctionality to the use of a towing hitch:• Address word "19", diagnosis interface for data bus.o Select function 007 coding (service $1A) “reading/writing long code”. Select address word „69“, trailer function.• Change to „Coded“.o Continue the coding according to the menu. Function „06“ Exit output.VW Universal 321 600 391 101 - 013 - 26/09 21

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!