BARBE DE 3 JOURS 3-DAY BEARD - BaByliss

and guarantees an even cutting
length.
NOTE: Always put the comb
guide on BEFORE turning
the trimmer on, and turn the
trimmer off before removing it.
To remove or replace the comb
guide, first set the comb guide
to double triangle mark (Fig. 1)
and, with the motor off, pull the
guide up to remove (Fig. 2) it,
press the guide down then turn
the dial to put it on (Fig. 3).
TURNING IT ON AND USING
IT
To adjust the cutting length of
the clipper, turn the dial; the
selected height will appear in
the little window above the
dial.
Switch the ON/OFF button and
select speed I or speed II. (Fig. 4)
You can change the cutting
length at any time.
NOTE! Make sure you hold the
comb head flat against the skin.
That is, the tips of the teeth and
the little corners protruding
from the comb should always
be in contact with the skin. If
not, the precision of the cut
may change.
(Fig. 5-6)
CUTTING TECHNIQUES
For the beard or moustache
just the way you want it…
Decide on the type of beard or
moustache that best suits your
face taking into account the
size of your face and natural
7
growth and thickness of your
beard and/or moustache. After
deciding on the form of the
beard and/or moustache, it is
easy to maintain its appearance
by using the trimmer as soon
as you feel it is necessary. For
better results, we recommend
cutting the beard when it is dry.
This helps make the cut precise
and comfortable.
To determine the shape of the
beard
After having combed your
beard in the direction of its
natural growth, decide on
the desired shape by starting
under the jaw. Come back up
each side towards the ears.
Then continue on your cheeks
towards the hair. Make sure you
always trim or style your beard
against the hair growth.
To create a 3-day-beard effect...
The special 3-day-beard cutting
guide is a guide especially
designed to ensure fine cuts
(short) and in particular 3-day
beards. It simply fits onto the
main guide and is just as easily
removed* when trimming
around the nose, lips or ears.
*To remove, press the oval
located near the two lines and
at the same time pull the guide
in front of the main guide.
(Fig. 7-8))
To thin the moustache,
sideburns, goatee, jaw line…
Place the end of the blade
without comb guide in the line