Руководство по установке QSK HK

Installation
3. Insert the decorative roll grille into the system convector trough. Using
an Allen key (size 3), push the fixing screws to the outside, and thus, the
fixing lugs into the recesses of the side parts. Finally, tighten the screws.
Note on installation cover!
Remove the protective cover permanently only after finishing the
installation of the system convector and after finishing all building
work. By this you avoid contamination and damage to the system
convector.
59
124645.1223 QSK HK 260 | 320 | 360
DEU
ENG
RUS
ITA
DAN