Руководство по установке QSK HK

Installation
Installation preparation
1. Remove the packaging of the QSK HK without damaging the device.
2. Remove the installation cover from the convector trough.
3. You will find the supplied accessories (according to the scope of delivery)
in the connection compartment (identified with a point) below
the installation cover.
4. The installation cover may only be removed permanently after the end of
all construction work.
Height adjustment
In your delivery you will find 4 types of adjustment blocks for height adjustment
and levelling:
Exterior with foot JBA 8.80
Interior with foot JBI 8.80
Exterior with fixing JBA 8.80-02
The QSK HK scope of delivery includes a total of 6 adjustment blocks as a set
for exterior use (according to scope of delivery) or optionally for interior installation
at the fan side.
The amount of adjustment blocks (JB) included in the scope of delivery
is only intended for levelling purposes! In order to achieve full stepon
ability, support the entire surface of the QSK HK with a pressureproof
filling substance, or with a heat and step-on acoustic insulation,
or increase the amount of adjustment blocks (see „free/full step-on
ability“)!
43
Free/full step-on ability:
KG
130
KG
180
A = 500 mm
A = 400 mm
A
Interior adjustment blocks for QSK HK on the fan side are only available
with a distance of 500 mm.
The following applies for free/complete step-on ability in case of exterior
adjustment blocks without support:
Installation and levelling
Top view
In order to protect the QSK HK against floating when bringing in
cast plasters/flowing screeds,
124645.1223 QSK HK 260 | 320 | 360
DEU
ENG
RUS
ITA
DAN