Руководство по установке QSK HK

DEU
ENG
RUS
ITA
DAN
Product information
Technical data
QSK HK 320 | 360
Adjustment blocks allow adjustable height 145 mm to 175 mm
Heat exchanger
QSK HK 320:
2 tubes
QSK HK 320:
4 tubes
QSK HK 360:
2 tubes
40
QSK HK 360:
4 tubes
398 mm | 850 mm | 1536 mm | 2286 mm
87 mm 87 mm 130 mm 130 mm
75 mm
Operating voltage primary primary 100-240 V, 50-60 Hz wide range input
Power input 20...35 W, according to length
2 x 0-10 V (heating and cooling)
Control inputs
1 x 0-10 V / 100 k speed
1 x 230 V, switching
2 x 24 V DC, short-circuit proof and overload proof
Output for actuator
Current carrying capacity
Continuous current: 500 mA
Current at make: 1 A
Mains connection terminals Screwless clamping technique, max. conductor section 2.5 mm²
Operating temperature range 0 °C to 45 °C
Storage temperature range -25 °C to 70 °C
Humidity max. 80%, not condensing
Protection type IP 21
Bus communication via telephone line I-Y(ST)Y, 2 x 2 x 0.8 mm
Master/slave recognition
automatically after start-up by recognition of an applied
control voltage of a device to be activated
max. line length of bus line* 100 m entire bus length
max. amount of units in a group* 15 (1 master + 14 slaves)
Warm water connection ¾” Eurocone with venting
Tube diameter Ø 15 mm
Operational pressure 1000 kPa (10 bar), optional 1600 kPa (16 bar)
Temperature of operating media max. 105°C
*The maximum length of the power line depends on the installation conditions.
Nameplate
Type: QSK HK 320-140-2150
100 - 240 V
50 - 60 Hz
max 35. W
IP - 21
Order: Pos.:
Order No.:
Declaration of conformity
Fensterseite - Window side
121858
1-B76-11-125
The company Möhlenhoff GmbH declares in
sole responsibility that the products QSK HK
320 and QSK HK 360 comply with all applicable
requirements of the guidelines 89/106/EG,
2004/108/EG and 2006/95/EG.
The following standards were
used for the assessment:
Conformity marking