RYOBI 520X RYOBI 520HX - Ferrostaal

Field Installation Design
The NP unit can be added to the RYOBI 520X/520HX in
your print shop. The parent presses, the 520X/520HX,
were designed and manufactured to allow easy field
installation of the NP unit.
Independent NP Impression Cylinder
Ryobi’s remarkable NP unit features an independent NP
impression cylinder which is completely separated from the
offset printing section. This system does not affect the
offset printing quality, and allows the combining of
finishing operations including numbering, vertical and
cross perforating, and imprinting.
Swing-Away Design
A swing-away design has been adopted for the NP unit.
When only offset printing is required without any finishing
operations, the NP unit can be swung away from the parent
press in just a few minutes.
• 8 inking rollers (including 2 form rollers) assure highquality
numbering and imprinting.
• The repeat numbering function allows the operator to set
any number of sheets, up to 9, to be identically numbered
before the next consecutive number is printed.
• Slitting and creasing are possible in the same way as
vertical perforation. A complete center slitting function is
also available (optional).
• For pre-registration of numbering boxes and perforators,
built-in positioning scales and register film are standard.
• An economy type NP unit: the NPE52 is also available.
NP52 NP Unit for Added-Value Jobs
NP52
NP52 NP Unit Specifications and Features
Max. Paper Size (when using NP Unit) 520 x 365 mm (20.47" x 14.37")
Min. Paper Size (when using NP Unit) 257 x 182 mm (10.12" x 7.17")
Paper Thickness (when numbering)
0.04-0.25 mm (0.0016"-0.0098")
Paper Thickness (when perforating)
0.04-0.15 mm (0.0016"-0.0059")
Max. Numbering Area
505 x 345 mm (19.88" x 13.58")
Max. Nylon Plate Size
90 x 120 mm (3.54" x 4.72") for one spot color printing
Max. Imprinting Area
505 x 345 mm (19.88" x 13.58") (Spot color printing of numerous
small images can be printed in this area)
Gripper Margin
9 – 1 mm (0.354" – 0.039")
Printing Speed (when using NP Unit) 3,000-8,000 S.P.H.
Number of lnk Rollers
8 (form rollers: 2)
Delivery System
Chain delivery system
Delivery Pile Capacity
350 mm (13.78")
Numbering Boxes (straight & convex)
Mount rings (max.) : 5, Numbering boxes on a ring (max.) : 4,
Total numbering boxes (max.) : 20
Repeat Numbering
Prints the same number on up to 9 consective sheets
Vertical perforator
5 pcs. (max.)
Cross perforator
3 pcs. (max.)
Unit Dimensions (L x W x H)
920 x 1,020 x 1,020 mm (3’ x 3’4" x 3’4")
Unit Net Weight
460 kg (1,015 lbs)
(1) Repeat numbering function
(2) Powder spray device
(3) A set of built-in positioning scales
(4) Pre-register plotting film and its table (PFP system)
(5) Numbering box (straight, backward)
(6) Mount ring for numbering
(7) Numbering cam
(8) Vertical perforator
Standard Equipment
2 pcs.
2 pcs.
2 pcs.
2 sets.
(Optional)
(9) Cross perforator
(10) Nylon plate holder, large-size, 95 x 130 mm
1 set
(3.7" x 5.1")
1 pc.
(11) Nylon plate holder mount ring
1 pc.
(12) Ink roller cleanup attachment for NP unit 1 pc.
(13) Delivery table dolly
1 pc.
(14) Steel base plate for NP unit
1 pc.
Optional Equipment
(1) Numbering box
(5) Creasing wheel
(Straight type: forward or backward, Convex type: forward or (6) Roller type rotary guide
backward)
(between offset press and NP Unit)
(2) Nylon plate holder, small-size. 33 x 44 mm (1.3" x 1.7") (7) Roller type delivery guide (for NP unit)
(3) Cylinder-type nylon plate holder: 505 x 345 mm (19.7" x 13.5") (8) Static eliminator
(4) Slitter wheel
Specifications Standard & Optional Equipment
RYOBI 520X RYOBI 520HX
Dampening System Molleton
RYOBI-matic Continuous
Dampening System
Max. Paper Size (W x L) 520 x 375 mm (20.47" x 14.76")
Min. Paper Size (W x L)
100 x 150 mm (3.94" x 5.91")
The postcard kit (standard) must be mounted.
Max. Printing Area (W x L) 505 x 350 mm (19.88" x 13.78")
Paper Thickness
0.04-0.4 (0.5) mm [0.0016"-0.016" (0.02")]
0.5 mm (0.02") stock can be printed when feeding sheets perpendicular to
the fiber direction.
13,000 S.P.H.
Max. Printing Speed
Local conditions, ink and stock type, and printing quality requried will affect
the maximum printing speed.
Maximum printing speed is 8,000 S.P.H. when printing postcard.
Plate Size
Standard: 510 x 400 mm (20.08" x 15.75")
Max.: 510 x 410 mm (20.08" x 16.14")
Plate Thickness (Total) 0.3 mm (0.012")
Plate Clamp Type Straight-edge plate clamp with positioning pins
Blanket Type
Blanket with alminum bar
Blanket Over-Blanket 541 x 437 x 1.95 mm (21.3" x 17.2" x 0.077")
Size Under-Blanket 505 x 389 x 0.6 mm (19.88" x 15.31" x 0.024")
Feeding System
Rotary type stream feeder
Feeder Pile Capacity 550 mm (21.65")
Feeder Pile System Pre-pile
Delivery System
Chain delivery
Delivery Pile Capacity 400 mm (15.75")
Infeed System
Underswing gripper and paper feed drum
Number of Ink Rollers 17 (form rollers: 4)
Rollers Water Rollers 5 (form rollers: 2)
4 (form rollers: 1)
Gripper Margin
9–1mm (0.354"–0.039")
Registration System Pull side guide, drop-away front lay (diagonal adjustment possible)
Vertical Image
Micro Adjustment Range
–1.0 mm (–0.039") by front lay
Vartical Image
Coarse Adjustment Range
–20 mm (–0.79")
Lateral Image
Micro Adjustment Range
–2.5 mm (–0.098") by side guide
Oiling System
Automatic centralized oiling system
Power
Power consumption
Motor Wattage
Dimensions (L x W x H)
Net Weight
Three-phase, 200 V, 50/60Hz,
13 A or other voltages
Three-phase, 200 V, 50/60Hz,
17 A or other voltages
4 kW
5 kW
Main motor : 3.2 kW, Pump motor : 0.75 kW
1,912 x 1,180 x 1,617 mm (6’3" x 3’10" x 5’4")
2,000 kg (4,400 lbs)
Design and specification are subject to change wihtout notice.
Specifications may slightly differ depending on the country.
GRAPHIC SYSTEMS DIVISION:
800-2 UKAI-CHO, FUCHU, HIROSHIMA 726-0002, JAPAN
TEL. 81-847-40-1600, FAX. 81-847-40-1601
RYOBI home page. http://www.ryobi-group.co.jp/
600 mm
(2')
1,700 mm
(5'7")
Mechanical Dimensions
Standard Equipment
(1) Rotary type stream feeder
(2) Front/side lay register controller
(3) RYOBI-matic Continuous dampening
system (520HX)
(4) Dampening solution cooling/circulation
device (520HX)
(5) Integrated feeder board roller
movement system
(6) Postcard kit
(7) Ink roller cleanup attachment
(8) Double sheet detectors
(mechanical & electronic)
(9) Slewed paper detector
(10) Pre-pile device
(11) Feeder tables (2 pcs.)
(12) Blanket with aluminum bar
(1) Dial control ink fountain
(2) RYOBI Speedy Clamp (for DS400
or Bacher 425)
(3) Straight-edge plate clamp
(for DS400 or Bacher 2000)
(4) Decurling device
(5) Intermediate tank for dampening
solution cooling/circulation device
(520HX)
(6) Dampening solution circulation
device (520X)
1,180 mm
(3'10")
1,617 mm
(5'4")
Optional Equipment
520X/520HX
1,912 mm
(6'3")
(13) Delivery table dolly (2 pcs.)
(14) Static eliminator
(15) Powder spray device
(16) Preset/repeat counter with batch
function (electronic, 5 figure)
(17) Machine counter
(8 figure, non-resettable, total
number of machine rotation)
(18) O.K. monitor
(19) Safety covers
(20) Cylinder safety bars
(21) Cylinder gap safety covers
(22) Plunger can
(23) Oil pan
(24) Tools
(25) Air cylinder compressor
(7) Hickey picker (520X)
(8) UV roller
(9) Nonstop delivery fork
(10) Tape inserter
(11) Print counter
(8 figure, non-resettable, total
number of sheets printed)
(12) High-precision register punch
RYOBI RP520-220F
(13) Register punch: Beil 220
(14) NP unit: NP52
920 mm
(3')
983 mm
(3'3")
740 mm
(2'5")
740 mm
(2'5")
NP unit: NP52
Copyright © 2007 Ryobi Limited
Cat. No. 520X/HX June '07 E07 HB02
Order No. H6520 01 00
Printed in Japan
RYOBI 520X
RYOBI 520HX
A3-Plus Size Single-Color Offset Presses